Merchandise Description
Inexpensive value overhead monitor conveyor drive chain UH-5075
5Ton regular chain features
No.1 Forging technology
Every single chain buckle is precision cast by means of ten processes, and the breaking power of the chain reaches 55KN.
No.2 Chain duration precision
Beneath the take a look at drive of 270N/m, the measured deviation does not exceed +.3%~-.1% of the nominal dimensions of the measured size.
No.3 High hardness
The wheels are carburized and quenched, and the floor hardness reaches 45 levels or far more.
No.3 Adaptable turning
The least horizontal turning radius of the chain can be R300mm*one hundred eighty degrees (turntable elbow), and the chain will go via the elbow easily without jamming.
5Ton 5075 conveyor chain parameters
| Model |
5 Ton Normal Chain |
5 Tons Horizontal Wheel Chain |
5 Tons Vertical Wheel Chain |
five Tons Further Hefty Chain |
| Parameters | ||||
| Chain pitch(mm) | one hundred fifty | one hundred fifty | one hundred fifty | 150 |
| Solitary point lifting(kg) | 15 | fifteen | twenty five | 25 |
|
Single point lifting fat KG (making use of Y-variety spreader or beam spreader) |
35 | 35 | fifty | 50 |
| Allowable chain rigidity (KN) | 30 | 30 | 30 | thirty |
| Chain ultimate tensile load KN | 55 | 55 | 55 | 55 |
| Chain fat(kg/m) | 4.2 | 4.six | 4.eighty five | five.three |
| Monitor technical specs | 57*sixty seven*17 | 57*sixty seven*17 | fifty seven*67*seventeen | 57*sixty seven*17 |
| Bare minimum hanging distance (mm) | a hundred and fifty | a hundred and fifty | 150 | one hundred fifty |
| Vertical roller diameter (mm) | fifty two | fifty two | fifty two | 52 |
| Horizental roller diameter (mm) | 45 | 45 | 45 | forty five |
| Transferring pace (m/min) | .5-15 | .5-fifteen | .5-15 | .5-fifteen |
| Least radius of gyration(mm) | R255 | R255 | R255 | R255 |
| Minimal vertical radius(mm) | R500 | R500 | R500 | R500 |
| Working temperature(ºC) | 250 | 250 | 250 | 250 |
Company look at
FAQ
one. who are we?
We are based in ZheJiang , China, start off from 2000,market to Central The united states(forty.00%),Northern Europe(30.00%),Western Europe(twenty.00%),South The us(ten.00%). There are complete about 201-300 men and women in our business office.
2. how can we ensure good quality?
Often a pre-creation sample just before mass manufacturing
Always ultimate Inspection ahead of cargo
three.what can you acquire from us?
mdf powder coating line, metallic powder coating line,house appliances assembly line, electrostatic spray paining line, overhead line conveyor elements.
four. why should you get from us not from other suppliers?
we are a factory for generating automatic coating line, home appliance assembly line significant in MDF powder coating line and metal powder coating and as properly as spare areas spraying for automobile and 3 c 3c course plastic shell painting line, washing device assembly line, LED Television assembly line, Fridge freezer and CZPT dryer assembly line, air conditioner assembly line, and so on.
5. what providers can we provide?
Acknowledged Delivery Phrases: FOB,EXW
Acknowledged Payment Currency:USD,HKD,CNY
Acknowledged Payment Sort: T/T
Language Spoken:English,Chinese.
|
US $19-25 / Meter | |
100 Meters (Min. Order) |
###
| After-sales Service: | on Line After Sale Service |
|---|---|
| Warranty: | 1 Year |
| Structure: | Chain Conveyor |
| Material: | Stainless Steel |
| Material Feature: | Heat Resistant, Fire Resistant |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Customization: |
Available
|
|---|
###
| Model |
5 Ton Standard Chain |
5 Tons Horizontal Wheel Chain |
5 Tons Vertical Wheel Chain |
5 Tons Extra Heavy Chain |
| Parameters | ||||
| Chain pitch(mm) | 150 | 150 | 150 | 150 |
| Single point lifting(kg) | 15 | 15 | 25 | 25 |
|
Single point lifting weight KG (using Y-type spreader or beam spreader) |
35 | 35 | 50 | 50 |
| Allowable chain tension (KN) | 30 | 30 | 30 | 30 |
| Chain ultimate tensile load KN | 55 | 55 | 55 | 55 |
| Chain weight(kg/m) | 4.2 | 4.6 | 4.85 | 5.3 |
| Track specifications | 57*67*17 | 57*67*17 | 57*67*17 | 57*67*17 |
| Minimum hanging distance (mm) | 150 | 150 | 150 | 150 |
| Vertical roller diameter (mm) | 52 | 52 | 52 | 52 |
| Horizental roller diameter (mm) | 45 | 45 | 45 | 45 |
| Moving speed (m/min) | 0.5-15 | 0.5-15 | 0.5-15 | 0.5-15 |
| Minimum radius of gyration(mm) | R255 | R255 | R255 | R255 |
| Minimum vertical radius(mm) | R500 | R500 | R500 | R500 |
| Working temperature(ºC) | 250 | 250 | 250 | 250 |
|
US $19-25 / Meter | |
100 Meters (Min. Order) |
###
| After-sales Service: | on Line After Sale Service |
|---|---|
| Warranty: | 1 Year |
| Structure: | Chain Conveyor |
| Material: | Stainless Steel |
| Material Feature: | Heat Resistant, Fire Resistant |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
| Customization: |
Available
|
|---|
###
| Model |
5 Ton Standard Chain |
5 Tons Horizontal Wheel Chain |
5 Tons Vertical Wheel Chain |
5 Tons Extra Heavy Chain |
| Parameters | ||||
| Chain pitch(mm) | 150 | 150 | 150 | 150 |
| Single point lifting(kg) | 15 | 15 | 25 | 25 |
|
Single point lifting weight KG (using Y-type spreader or beam spreader) |
35 | 35 | 50 | 50 |
| Allowable chain tension (KN) | 30 | 30 | 30 | 30 |
| Chain ultimate tensile load KN | 55 | 55 | 55 | 55 |
| Chain weight(kg/m) | 4.2 | 4.6 | 4.85 | 5.3 |
| Track specifications | 57*67*17 | 57*67*17 | 57*67*17 | 57*67*17 |
| Minimum hanging distance (mm) | 150 | 150 | 150 | 150 |
| Vertical roller diameter (mm) | 52 | 52 | 52 | 52 |
| Horizental roller diameter (mm) | 45 | 45 | 45 | 45 |
| Moving speed (m/min) | 0.5-15 | 0.5-15 | 0.5-15 | 0.5-15 |
| Minimum radius of gyration(mm) | R255 | R255 | R255 | R255 |
| Minimum vertical radius(mm) | R500 | R500 | R500 | R500 |
| Working temperature(ºC) | 250 | 250 | 250 | 250 |
Pin chain conveyor
The choice between roller chains and friction drives depends on the usage environment. Roller chains are more resistant to dirty environments and are more suitable for conveying bulk products. The pivot chain is designed to handle highly bulk products. Ideally, the center-to-center distance between the two axles should be thirty to fifty times the chain pitch. The size of the sprocket will depend on the usage environment, which will also determine the fatigue strength and resistance of the chain.
Roller chains are more resistant to dirty environments
There are some key differences between drive chains and roller chains. The most notable difference is in the materials. Drive chains are generally more durable than roller chains. However, both chains are prone to dirty environments. While solution chains are sometimes used for heavy-duty tasks, roller chains are often used in dirtier environments. In fact, drive chains are often used when the job is very dirty and the chain has to slide on the rails.
The new lubricant used on the roller chain attracts dirt and other debris to the surface of the chain and prevents lubricant from entering the load-carrying parts of the chain, such as hinge plates, bushings, and rollers. When dust is drawn into these components, lubricants, and dirt form an abrasive paste that accelerates wear.
Lube-free roller chains keep chains clean longer. This makes it easier to specify and install in areas with strict hygiene requirements. CZPT lube-free roller chains meet NSF-H1 lubrication standards. However, lubricated roller chains are still suitable for areas where food contact is unlikely.
Stainless steel roller chains are particularly resistant to acids, alkalis, and low-temperature environments. Since stainless steel is softer than carbon steel, lubricants are not as effective at preventing dirt from entering the chain. Stainless steel roller chains have a higher strength rating than standard chains, but are not as strong as chains made from carbon steel. If you are using a roller chain in a very dirty environment, you should use a stainless steel chain.
A stud chain is more efficient than a friction drive
The present invention relates to a light-duty double-ended chain that is more efficient than conventional chains. Stud chains are made by die-forging bar steel into roughly the-shaped links. This method avoids loss of shear strength due to bending and also minimizes the welded portion. The double-headed chain is light in weight and has strong resistance to fatigue damage.
This chain type has a stud-style design. Stud-shaped design provides greater tensile strength and prevents tangling. Each stud is formed by die forging and is usually shaped like an e or th. However, it is not necessary for each stud to have a uniform cross-sectional shape. Different cross-sectional shapes can be used depending on the application.
Stud chains are more efficient than friction drives because the studs in the chain are integrated. Stud links resist large breaks. Its applications are in conveyor chains and fisheries. Wear tested on boat chains made of SBC material. In the process, bolt chains were found to be more efficient than friction drives. Its applications are rapidly expanding.
Double-ended chains are more efficient for high-load applications. It features studs throughout its internal width to prevent kinking. Chains of this type are commonly used for heavy lifting machinery. Other types of chains are roller chains, power transmission chains, and bushing roller chains. These types of chains are also widely used in motorcycle, bicycle and transportation applications. In addition to being more efficient, stud chains also have fewer wear problems than friction drive chains.
A study on the difference between wear percentage and friction time showed that stud chains are more efficient than friction drives. The friction strips were measured at the beginning of the test. Take it off after 6 hours, 10080 times, and take pictures with the same diameter. As a boundary value, the diameter of the friction strip is smaller than that of a conventional chain. This shows that the present invention has better wear resistance than friction drives.
Shaft chains designed for conveying bulk products
Pivot chains are versatile conveyors used in many applications. Low back type, small backrest distance, rear opening design to prevent the product from sticking to the joints and causing stiffness. Stainless steel and carbon bushing pin chains do not have pre-rotating rollers. In contrast, bucket elevators do not use pivot chains.
CZPT pin chains provide unmatched performance in agricultural and industrial machinery. They are constructed from a single cast barrel and are connected by hardened steel pins. CZPT’s steel pivot chains are strong enough to withstand the corrosive environments of agricultural and industrial applications. The steel pins in the CZPT Pintle Chain are hardened and riveted to ensure long-term durability and optimum performance.
Lifeguard chains feature patented interlocking side links that reduce gaps between adjacent side panels. They can withstand a variety of applications and will never break under pressure. These chains are available in 1/2” and 1” pitch configurations. CZPT combines both types of pin chains to achieve the best of both worlds. CZPT features dual pin chains and pin joints to increase chain durability and reduce maintenance hassles.
CZPT’s engineering team can custom design pivot chains for your specific application. Designed for specific speed, friction, temperature and wear requirements, these chains are ideal for a variety of applications. Headquartered in Milwaukee, Wisconsin, the company operates on two strategic platforms: Food and Beverage and Industrial Applications. The products of these companies are used in food, energy and manufacturing.
editor by czh 2022-12-30